Products

  • KOMATSU D80 D155  Link Rod

    KOMATSU D80 D155 Link Rod

    Appearance and process: Medium frequency heating is adopted for the hot or cold forging process of the multi-location moulding machine, followed by net belt heating.

  • Hitachi Excavator Spare Parts

    Hitachi Excavator Spare Parts

    After quenching and tempering, the pin undergoes mid-frequency induction hardening to ensure sufficient core strength and wear resistance of the external surface.

    After carburisation, the pin bush undergoes internal and external mid-frequency induction hardening to ensure reasonable core hardness and wear resistance of the internal and external surfaces.

  • Excavator SWING MOTOR BEARINGS 30205

    Excavator SWING MOTOR BEARINGS 30205

    Advanced technology is used to produce high-quality products. The excellent-quality casting blank is produced on JALE’s advanced production line with microcomputer control.

  • SWING GEAR BOX BEARINGS 22219

    SWING GEAR BOX BEARINGS 22219

    Advanced technology is used to produce high-quality products. The excellent-quality casting blank is produced using JALE’s advanced production line and microcomputer control.

  • Bucket  Pin Doosan DX225 K1007256

    Bucket Pin Doosan DX225 K1007256

    This bucket cylinder pin (K1007256) is made of 45# material, which is ideal for quenching and tempering. After this process, surface induction treatment is carried out following turning and other processes. This ensures that the Doosan Excavator DX225 Link Pin has enhanced durability and wear resistance, and fits the DX225 model perfectly. We can confidently say that this Doosan DX225 link pin was manufactured to meet or exceed Doosan’s own standards.

  • Link Rod Caterpillar CAT345

    Link Rod Caterpillar CAT345

    JALE’s connecting rods, from raw materials to finished products, are produced using advanced technology from home and abroad. This enables us to ensure perfect interchangeability with original car parts.

  • Se200 Track Shoe Assy Se210 Track Link

    Se200 Track Shoe Assy Se210 Track Link

    The link rod has a yield strength of 800 MPa, an impact flexibility of 800 kJ/m², and a centre hardness of 22–25 HRC. High-strength CO₂ gas-shielded welding is used to ensure the strength of the link mechanism. The internal liner is made of spheroidal graphite cast iron to guarantee the self-lubricating function of the bucket link.

     

    As tipping links are not bushed, the bores will eventually wear out and require replacement. Damage to the bucket and tipping links can result from the bucket pins coming adrift during digging or becoming fouled by items such as lifting chains. Damaged links should be replaced immediately to avoid further damage to the bucket, dipper arm and bucket ram.

     

    For your convenience, we stock tipping links in pairs and bucket links without bushes, enabling you to reuse bushes where they are still in good condition.

  • Bucket Pin KOMATSU PC300

    Bucket Pin KOMATSU PC300

    Our advanced technology is used to produce high-quality products. The casting blank, of excellent quality, is produced using JALE’s advanced Production-Line and Micro-Computer Control systems.

  • F 22/35 / Hb 15g Through Bolt Furukawa Hammer Spare Parts

    F 22/35 / Hb 15g Through Bolt Furukawa Hammer Spare Parts

    Our company is proud to use advanced technology to produce high-quality products. The casting blank, of excellent quality, is produced using JALE’s advanced Production-Line and Micro-Computer Control systems.

  • Arm Pin Hitachi EX200

    Arm Pin Hitachi EX200

    This Arm Pin Hitachi EX200 is especially suitable for quenching and tempering. Following quenching and tempering, the surface induction treatment is carried out after turning and other processes. This process ensures that the Arm Pin Hitachi EX200 model is more durable and resistant to wear, and is a better fit for the Hitachi EX200 model.

     

  • Bushing Komatsu PC200-6 60*80*60

    Bushing Komatsu PC200-6 60*80*60

    JALE top line manufactures products in-house, from the raw material to the finished product. The superior quality of our products ensures that they are interchangeable with the original items. We are confident that our competitive pricing structure will make our parts a highly attractive proposition.

  • Komatsu PC300-7 PC400-5

    Komatsu PC300-7 PC400-5

    We offer a comprehensive range of diving gear, including complete models and types, suitable for excavating equipment ranging from 0.8 to 100 tons.

    The product incorporates state-of-the-art precision processing technology and a special heat treatment technique, resulting in optimal wear resistance and a significantly extended lifespan.

123456 Next > >> Page 1 / 9